Hot Peel transfers are quick and easy to use, designed for those who want fast production without sacrificing quality. This method allows you to peel the film right after pressing, resulting in a vibrant, smooth, and long-lasting finish on a wide variety of fabrics.
How to Apply Hot Peel DTF Transfers
Follow these simple steps for the best results:
Set your heat press Adjust the temperature and timer based on your fabric type (see chart below). Use medium pressure (about 60 lbs.).
Place your garment Lay it flat on the heat press, making sure there are no wrinkles or moisture.
Position the transfer Place your DTF film where you want the design. Tip: To protect the garment and film from too much heat, cover with Teflon or parchment paper.
Press for 3–8 seconds
Peel immediately Remove the garment and peel the film right away — ideally within 5 seconds while it’s still hot.
Post-press Press again for 3–5 seconds to improve adhesion and make the print last longer.
Recommended Heat Press Settings
Fabric Type
Temperature
Cotton
325°F (163°C)
Polyester
275°F (135°C)
Tri-Blends
275°F (135°C)
50/50 Blends
300°F (149°C)
Works Great On
Cotton, Combined Cotton, Tri-Blend, 50/50 Blends, Polyester, Blended Fabrics, Leather, Vinyl, Denim, Canvas, and more.
