Cold Peel transfers are easy to use and deliver a smooth, matte, and long-lasting finish. This method lets your design fully cool before peeling, giving you vibrant colors, clean edges, and excellent durability on almost any fabric.
How to Apply Cold Peel DTF Transfers
Follow these simple steps to get the best results:
Set your heat press Adjust temperature and timer based on fabric type (see chart below). Use medium pressure (about 60 lbs).
Place your garment Lay it flat on the press and remove any wrinkles or moisture.
Position the transfer Place your DTF film where you want the design. Tip: Use Teflon or parchment paper on top to prevent overheating.
Press for 8–15 seconds
Cool down Remove the garment and let it cool completely for 1–2 minutes.
Peel the film Once cool to the touch, peel off the film slowly and carefully.
Post-press Press again for 3–5 seconds to seal the print and increase durability.
Recommended Heat Press Settings
Fabric Type
Temperature
Cotton
325°F (163°C)
Polyester
275°F (135°C)
Tri-Blends
275°F (135°C)
50/50 Blends
300°F (149°C)
Works Great On
Cotton, Polyester, Tri-Blends, 50/50 Blends, Leather, Vinyl, Denim, Canvas, and more
